Frequently Asked Questions


	Products Product List Comparison Reviews Videos Support Manuals Drivers Software FAQ Troubleshooting Ordering Shipping Returns Warranty Payment Methods Resources Power Simulator Glossary Links About Cart/Checkout

New Products

Systems

Power Supplies

Displays

Special Deals

Troubleshooting/Frequently Asked Questions

picoPSU series

Power Source

Q: My picoPSU is not powering my device.
A: Make sure you check the following:

Your power supply is a REGULATED 12V power supply and at least 5A
Check to see if the green LED on the picoPSU is lighted up

If it still does not work, please contact us.

Q: Is there a way to some picoPSUs to the Intel D201GLY series boards WITHOUT an ATX Extender?

A: Yes. You will need to desolder the inductor (grey) that is obstructing the ethernet ports on the board and solder a lower profile inductor.

The Intel D201GLY series boards consumes only 0.4A on the 3.3V rail (this inductor belongs to 3.3V rail) and get a 10x10mm inductor (about 2-4uH with a height under 4mm, if
possible).

This can be purchased at: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=513-1332-1-ND

Q:My picoPSU-60-WI will not boot up.

A:Please make sure you are not using any devices that consume 12V, e.g. 3.5" drives or CDROMs. This PSU cannot power 3.5" drives and 5.25" CDROMS. Please use 2.5" drives or SlimCDs or flash disks for your systems instead.