Introducing the picoPSU-60-WI, the world's tiniest 6V-26V DC-DC ATX power supply unit (PSU)!

Compact Design, Less Cables
The picoPSU-60-WI is the smallest snap-in 6V-26V ATX DC-DC power supply. The picoPSU-60-WI is compatible with an entire range of mini-ITX motherboards as well as regular boards. The picoPSU-60-WI provides a cool, silent 60 watts or 80 watts (peak) of power for small PC designs using a single 6V-26V power source.

By using patent pending HyperWatt™ technologies, the picoPSU-60-WI packs an impressive amount of power relative with its very small footprint.

Small computer projects start with small power supplies. The picoPSU-60-WI is a crucial key component that unleashes the ultimate power solution for general purpose computing platforms. The picoPSU-60-WI is fully ATX compliant, making it an excellent candidate for any silent, 6V-26V DC-DC computer project.

Reduce Space
Eliminate up to 20 unnecessary wires by plugging in directly into the motherboard ATX connector. The picoPSU-60-WI 6V-26V DC-DC ATX converter was designed from ground up to fit small form factor ATX boards, allowing enclosure designers to save space while not compromising power requirements.

Cool Power
Operating at only 6V-26V, the picoPSU-60-WI DC-DC ATX power supply generates 60 watts of power. The picoPSU-60-WI provides plenty of power (via ATX connector and HDD cable harness) for CPU and an entire range of peripherals.

100% Silent
The picoPSU-60-WI mini PSU is a 100% silent fanless DC to DC solution. No fans. No noise. Just power for small and silent PCs.
Fully Compliant The picoPSU-60-WI is a fully compliant DC-DC ATX PC PSU. It can power VIA mini-ITX boards with C3 or C7 processors, Pentium-M, Core Duo Mobile that gets V(core) from the 5V rail.

The picoPSU-60-WI ATX DC-DC converter is very small, measuring just 31 x 45 x 20 mm, about the size of two AA batteries. The picoPSU-60-WI is also 1U ServerRack compliant.

NOTE: This PSU cannot power 3.5" drives and 5.25" CDROMS. Please use 2.5" drives or SlimCDs or flash disks for your systems instead. This is due to limited 12V rail output capabilities. This PSU is guaranteed to work with any VIA mini-ITX board or Pentium-M/Core Solo or Core Duo that gets V(core) from the 5V rail. These types of motherboards use only 50-150mA on the 12V rail.

The picoPSU-60-WI is ideal for low power Intel Core Duos, Pentium-Ms, as well as all VIA C3/C7 motherboards. Also works with the Intel D201GLY series (requires ATX extension cable).

• 120 watts, 12V DC operation
• 100% silent, fanless operation
• Intel Core Duo compatible

• 5.25 Male to 2 5.25 Female molex cable
• Length: 8" (203mm)

• Length: 2" (51 mm)
• standard 4-pin Molex to 4-pin P4 cable (ATX12V)
  
• Provide additional power for Pentium 4 (P4) class motherboards
• Suitable for use with the picoPSU series

• Length: 8" (203 mm)
• standard 4-pin Molex to 4-pin P4 cable (ATX12V)
  
• Provide additional power for Pentium 4 (P4) class motherboards
• Suitable for use with the picoPSU series

• 120 watts
• 12V-32V wide input
• 100% silent, fanless operation
• Highly efficient design - minimal heat
• Ideal for low power Intel Core Duo as well as all VIA C3/C7 motherboards

• 120 watts
• 12V-25V wide input
• 100% silent, fanless operation
• Highly efficient design - minimal heat
• Ideal for low power Intel Core Duo as well as all VIA C3/C7 motherboards

• 160 watts
• Ideal car power supply for operating P4, P4-M, Celeron, AMD, Core 2 Duo systems
• Controls ON/OFF switch of a motherboard (PC) based on ignition status
• Wide input (6-24V) -- works with 12V-24V vehicle/car batteries
• Survives car engine cranks

• 140 watts
• Ideal car power supply for operating P4, P4-M, Celeron, AMD, Core 2 Duo systems
• Controls ON/OFF switch of a motherboard (PC) based on ignition status
• Extra Wide input (6-32V) -- works with 12V-24V vehicle/car batteries
• Survives car engine cranks