VoomPC 2 CarPC mini-ITX Enclosure

The stylish VoomPC-2™ automotive (car, boat, electric cart) enclosure is a small, rugged carPC /carputer enclosure designed to work in harsh environments, such as high dust and high temperatures. The VoomPC™ carPC/carputer enclosure was designed to work with any type of mini-ITX motherboard (6.7" x 6.7" / 170mm x 170mm) from fanless configurations such as VIA mini-ITX, Pentium or low power Pentium-M processors. This CarPC/carputer enclosure is specifically designed to work with the M1-ATX, M2-ATX and the M2-ATX-HV automotive power supply series.

The VoomPC-2™ CarPC/carputer enclosure can accept a SlimCD drive and a 2.5" hard drives, mounted on sillicone rubber shock-mounts.

NOTE: SlimCD drive requires the SlimCD to 2.5in IDE Adapter .

• Fits any standard mini-ITX motherboard
• Designed to work with the M1-ATX, M2-ATX and the M2-ATX-HV automotive power supply series
• NOTE: fits one or two 2.5" hard drives. Will not fit 3.5" drives or CD/DVD drives
• RoHS Compliant

• Fast VIA C7 2.0GHz Processor (J7F2WE2G)
• Integrated 128bit 2D/3D VIA S3 Graphics UniChrome Pro Processor
• DDR2 memory support
• Serial-ATA, IEEE 1394 (Firewire), USB 2.0 and 10/100 Mbps Fast Ethernet
• TV-out (PAL/NTSC): VIA VT1622A TV encoder
• Dimensions: 6.7"x6.7" (170mm x 170mm) - mini-ITX
• RoHS Compliant

• Integrated Intel® Celeron® 220 processor with a 533 MHz system bus
  
• FANLESS design
  
• SiS662 Graphics and Memory Controller (Northbridge) and SiS964L I/O controller (Southbridge)
• 512K L2 cache
• 10/100 Mbits/sec LAN subsystem using the Broadcom
• LAN adapter device
• 1x DDR2 Memory Slot supports up to 1GB
• 6x USB 2.0 Ports
• 2x SATA 1.5Gb/s Channels
  
• Dimensions: 6.7"x6.7" (170mm x 170mm) - mini-ITX
• RoHS Compliant

• 160 watts
• Ideal car power supply for operating P4, P4-M, Celeron, AMD, Core 2 Duo systems
• Controls ON/OFF switch of a motherboard (PC) based on ignition status
• Wide input (6-24V) -- works with 12V-24V vehicle/car batteries
• Survives car engine cranks

• Compatible with all types of slim ATAPI devices: CD-ROM/DVD-ROM/CD-RW/DVD-RW drives
• Provides slim ATAPI devices with 2.0mm pitch 44 pin IDE/Power and CD Audio connectors
• Package Contains:
  • 1x fine-pitch 50-pin connector for slim drive
  • 1x 44-pin 2.0 pitch box header for IDE/Power cable, support device cable-select mode
  • 1x 4-pin 2.54 pitch CD Audio connector
  • mini jumper for setting Master/Slave/CableSelect modes
  • 2x mounting screws
• Dimensions: 4in x 0.5in x .75in (101mm x 13mm x 19mm)

• Use a 2.5" drive on your standard IDE motherboard
• 40-Pin to 44-Pin 2.5" Laptop IDE Hard Drive Cable Adapter
• With Molex 4-pin IDE power plug
• Length: 8" (203mm)

• Model: Sony NEC Optiarc CRX890A
• 8X DVD-CDRW Slim Combo Drive, 8X DVD-ROM,
  24X CD-R, 24X CD-RW, 24X CD-ROM
• Cache: 2MB
• WRITE Speed: CD-R: 24X. CD-RW: 24X
• READ Speed: DVD-ROM: 8X. CD-ROM: 24X
• Physical Spec: Form Factor: 5"
• Panel Color: Black
• Configuration: Load Type: Tray
• Interface: IDE
• Fits our VoomPC 2 enclosure

Notes: (1) This is an OEM drive. Audio cable, IDE cable, and mounting screws are optional. (2) No software is included. (3) No instruction manual.